Honda BF135A Manual page 324

14) Remove the four screws and the retainer plate.
Remove the two stud bolts from the stator [drive end
housing].
15) Check the front bearing for abnormal sound or play before
removal.
Replace the front bearing if necessary.
16) Holding the stator [drive end housing] by attaching the
wood blocks to both sides of the stator [drive end housing]
as shown, remove the front bearing from the stator using
the special tools.
Replace the front bearing with a new one on assembly.
TOOLS:
Driver
Attachment, 24 x 26 mm
Pilot, 15 mm
6-13
[4]
STATOR
[DRIVE END
HOUSING]
[3]
STUD
BOLT (2)
07749-0010000
07746-0010700
07746-0040300
[4] ATTACHMENT,
[1]
RETAINER
PLATE
24 x 26 mm
07746-0010700
[2] SCREW (4)
[1]
DRIVER
07749-0010000
[2] FRONT
BEARING
[3]
PILOT, 15 mm
07746-0040300