Honda BF135A Manual page 351

f. ASSEMBLY OF WATER RELIEF TUBE ASSEMBLY
NOTICE
Check the tubes for deterioration and cracks before assembly.
Replace if necessary.
1) Note the connection position of each tube to the 4-way joint
as shown.
2) Connect the water relief tube B to the 4-way joint so that its
installation angle is approximately 33˚ as shown.
3) Connect the water relief tube A to the 4-way joint so that its
installation angle is approximately 90˚ as shown.
4) Set the tube clamp D25.0s on the water relief tube A and B.
5) Set the tube clamp D25.0s in the position 8 mm from the
end of each tube as shown.
8-8
[1]
WATER RELIEF
TUBE A SIDE
[3]
WATER RELIEF
TUBE B SIDE
[4]
4-WAY JOINT
[5]
APPROX. 33˚
[1]
4-WAY JOINT
[3]
APPROX. 90˚
[1] TUBE CLAMP
D25.0 (2)
8 mm
(0.3 in)
8 mm
(0.3 in)
[2]
4-WAY JOINT
[6]
WATER RELIEF
TUBE B
[2]
WATER RELIEF
TUBE A
[2]
WATER RELIEF
TUBE A
[3]
4-WAY JOINT
[4]
WATER RELIEF
TUBE B