Honda BF135A Manual page 598

26) Check the anode metal for corrosion and replace with a
new one if necessary.
Tighten the anode metal with the two 6 x 25 mm hex. bolts
securely.
27) If the manual valve is tightened, loosen it fully.
Raise the swivel case assembly a little, unlock the tilt
stopper and lower the swivel case assembly to the
lowermost position.
28) Remove the following parts.
– Stern bracket/swivel case (P. 15-12)
– Gear case assembly (P. 14-5 and 44)
– L./R. engine under covers (P. 4-14)
– Engine cover (P. 4-2)
15-35
[2]
6 mm
WASHER (2)
[1] ANODE
METAL
[3]
6 x 25 mm
HEX. BOLT (2)
[1] MANUAL VALVE