Electrical Equipment; Starter Motor - Honda BF135A Manual

18. ELECTRICAL EQUIPMENT

1. STARTER MOTOR

2. STARTER CABLE
3. ECM/PGM-FI MAIN RELAY/FUSE BOX
1. STARTER MOTOR
a. REMOVAL
1) Disconnect the negative (–) cable from the battery negative terminal.
2) Disconnect the main relay (White) terminal from the magnetic switch.
3) Move the terminal cover aside and remove the 8 mm washer-nuts and the 8 mm washer. Disconnect the alternator
fuse cable and the starter cable from the starter magnetic switch.
4) Loosen the 10 x 90 mm flange bolt fully.
5) Remove the starter motor together with the 10 x 90 mm flange bolt.
6) Remove the O-ring from the starter motor.
• Replace the O-ring.
18-1
[1]
8 mm WASHER-NUT (2)
[9]
8 mm WASHER
[8]
STARTER MOTOR
4. POWER TILT RELAY/CONNECTOR
BRACKET A
[2]
ALTERNATOR FUSE CABLE
[3]
STARTER CABLE
[5]
10 x 90
Loosen fully and remove
together with the starter
motor.
[6]
STARTER MAGNETIC
SWITCH
[7]
O-RING
Do not reuse.
[4]
MAIN RELAY
TERMINAL (W)