R1 Type; R2 Type; R3 Type; Neutral Release Lever - Honda BF75A Owner's Manual

Neutral Release Lever

(R1 type)

NEUTRAL RELEASE
LEVER

(R2 type)

NEUTRAL RELEASE
LEVER
The neutral release lever is set on the
remote control lever to prevent an
accidental operation of the remote
control lever.
The remote control lever does not
operate unless it is moved while
pulling the neutral release lever up.

Engine Switch

(R1 type)
ON
OFF
This remote control is equipped with
an automotive type ignition switch.
On the side-mount type (R1 type),
the engine switch locates on your
side near the remote control box.
On the panel-mount type (R2 type)
and the top-mount type (R3 type), the
engine switch locates at the center of
the switch panel.
Key positions:
START: to start the engine.
ON: to run the engine after
starting.
OFF: to stop the engine
(IGNITION OFF).
CONTROLS (R type)
(R2, R3 type)
START
ENGINE
SWITCH
OFF
KEY
ON
OFF
START
Do not leave the engine switch
(ignition switch) ON (key in ON
position) when the engine is not
running as the battery will
discharge.
The starter motor will not work
unless the remote control lever is in
the NEUTRAL position.
START
ON
ENGINE SWITCH KEY
25