Honda BF135A Manual page 81

[1] PRESSURE REGULATOR
CONTROL TUBE
Connect the pressure
control tube aligning the marked part
on the tube with the end of the 3.5
mm tube clamp.
[1]-1
PRESSURE REGULATOR
CONTROL TUBE
[1]-3 MARKING
[20]
DIAPHRAGM
TUBE
[19] IAB CONTROL VALVE
TUBE
[18] AIR VENT TUBE A
[17] HOSE CLAMP
Set the air vent tube B in the
clamp of the larger diameter
side and the pressure regulator
return hose in the smaller
diameter side.
2-71
regulator
[1]-2
3.5 mm
TUBE
[2]
CLIP
BREATHER
TUBE
[3]
3.5 mm TUBE
CLIPS
[15]
AIR VENT
TUBE B
[16] PIPE CLAMP
Set the air vent tube A in the
clamp of the larger diameter
side and the air vent tube D in
the smaller diameter side.
[5] FUEL TUBE CLAMP
Set the breather tube in the clamp of
the larger diameter side and the
pressure regulator control tube in the
smaller diameter side.
[4]
18.5 mm
CLAMP
[11]
CHECK
VALVE
[12]
[14]
AIR VENT
T-JOINT
TUBE C
[13] HOSE CLAMP
Set the air vent tube A in the
clamp of the larger diameter
side and
regulator return hose in the
smaller diameter side.
[6] TUBE CLAMP D25.0
INSTALLATION: P. 2-67
[7] WATER RELIEF
TUBE A
INSTALLATION:
P. 2-66
[4]
18.5 mm
CLAMP
[8]
AIR VENT
TUBE D
[9] TUBE CLAMP
D10.7
INSTALLATION:
P. 2-59
[10]
PRESSURE
REGULATOR
RETURN HOSE
the pressure