Projector Hours (Pjh); Ping (Png); Swap (Pps) - Christie Mirage WQ-L User Manual

Projector Hours (PJH)

PJH
Unsaved
CONTROL GROUP:
Description
Reports the number of hours elapsed on the projector. This control is read-only.
Subcode
<No Subcode >
Example:
(PJH ?) Returns hours elapsed on projector.

PING (PNG)

PNG
Configuration
CONTROL GROUP:
Description
This command returns basic projector information to the user which includes the type of device & main software
version. Note that some devices have multiple CPUs each with its own software version. Only the software
version of what is considered to be the master CPU, is returned here. The return parameters are: Type, Major,
Minor, Beta. The beta value is optional meaning it is an engineering build and has not been validated.
NOTE: List of devices: 40 = ACT, 41 = Cinema, 42 = CinemaMini, 43 = Media Block, 44 = Mobius, 
45 = Entero/StIM, 52 = StIM™ WQ.
Subcode
<No Subcode >
Example:
(PNG?) (PNG!41 001 000 234) Indicates 'Cinema' type, software: 1 major, 0 minor, 234 beta.

Swap (PPS)

PPS
CONTROL GROUP: Preference
Description
This control swaps the current main and Inputs. It will swap the Inputs regardless if there are valid signals on
either of the Inputs.
Subcode
<No Subcode >
Example:
(PPS) Swap Inputs.
Mirage WQ-L User Manual
020-101372-01 Rev. 1 (04-2014)
Power Down
SUBCLASS:
Description of Use
Power Down
SUBCLASS:
Description of Use
SUBCLASS: Power Up
Description of Use
Serial Command Reference
Operator
ACCESS LEVEL:
ACCESS LEVEL:
ACCESS LEVEL: Operator
Status
94