System Function; System - Keys - Yamaha A3000 Owner's Manual

SYSTEM Function

SYSTEM - Keys

Sets the operation of the ASSIGNABLE and AUDITION keys.
PLAY PROGRAM
EDIT TRIM / LOOP
REC RECORD
DISK PROGRAM
UTILITY TOTAL EQ
Turn action
Push action
Knob 1
Knobs 2, 3
Chapter 8 UTILITY Mode
300
SYSTEM Function
Use this function to set up the system's operating environment and screen-display op-
tions, and to check the amount of free memory.
SAMPLE EASY EDIT EFFECT SETUP
MAP / OUT FILTER EG LFO
SETUP METER EFFECT EXT CTRL
SAMPLE SEQUENCE VOLUME DISK
PANEL PLAY SEQUENCE MASTER SYSTEM
Knob 1
This page sets the operation of the ASSIGNABLE and AUDITION keys.
Change Page
• Turn the knob to change to a different page within the SYSTEM function. Available
pages are: Keys (this page), Display, Page, and FreeMem.
• Push the knob to move to the Program/Sample Selection screen. ( 95)
ASSIGNABLE
Turn either knob to select the operation of the ASSIGNABLE key.
Damp
Controller Reset
Knob Control on/off
Fkey Play on/off
CONTROL
MIDI / CTRL
Turn Knob 1 to select Keys.
MONITOR
IMPORT
MIDI
Knob 2 Knob 3
- -
= Damp,...,Fkey Play on/off
Switches off (damps) all sound output.
Resets all control-change values.
Switches the knob operation mode. While the ASSIGNABLE
key is engaged (indicator lamp is on), Knobs 2 to 5 operate as
controllers, in accordance with the settings in the KnobSet page
of the PANEL PLAY function ( 292).
Switches the function-key operation mode. While the ASSIGN-
ABLE key is engaged (indicator lamp is on), the function keys
operate as keyboard keys -- transmitting Note On messages in
accordance with the settings in the FKeySet page of the PANEL
PLAY function ( 294).
Knob 4 Knob 5
-
- -
Select P/S