Table of Contents
Advertisement
5: EDITING
The MSS1
editing mode makes it possible to make changes to recorded tempo data. You can replace tempo data
at specific measure/beats, copv a block of tempo data from anv portion of a recorded piece to anv other, delete
tempo data at specific measure/beats, or insert new tempo data.
1.
Press the SONG
CUE key.
LOCATING
A
2.
Enter the desired measure via the 10-key pad when the "Set measure" display
SPECIFIED
appears on the LCD, then press ENTER.
Enter the desired beat via the 10-key pad when the "Set beat" display appears
3.
MEASURE|BEAT
on the LCD, then press ENTER.
USING
THE SONG
ө Press the STOP key to exit and cancel at any stage before the last step is per-
CUE FUNCTION
formed.
p
Enter measure
ENTER
Set
beat
Enter beat
p
1.
In the EDIT mode
(press the EDIT key), use the YES> and «NO keys or the
REPLACING
TEMPO
SONG
CUE function to locate the measure and beat at which a new tempo
DATA
value is to be programmed.
T
Press the EDIT-REPLACE
(TIME
CUE)
key. The MIDI TEMPO
display will
go out.
3.
Enter the new tempo value for the currently displayed location via the 10-key
pad or by using the YES» and «NO keys.
4.
Press the ENTER key.
ө Press the STOP key to exit and cancel at any stage before the last step is per-
formed.
=.
Locate measure and beat
|
=
Enter tempo value
25
EN
Advertisement
Table of Contents
