Setup Function; Setup - Pgmmstr (Program's Master Settings) - Yamaha A3000 Owner's Manual

SETUP Function

SETUP - PgmMstr (Program's Master Settings)

Sets the program's output level, transposition, and LFO "sample & hold" speed.
PLAY PROGRAM
EDIT TRIM / LOOP
REC RECORD
DISK PROGRAM
UTILITY TOTAL EQ
Turn action
Push action
Knob 1
Knob 2
Knob 3
Chapter 4 PLAY Mode
128
SETUP Function
The PLAY-mode SETUP function lets you set each program's general output level, trans-
position, portamento, and A/D-input.
SAMPLE EASY EDIT EFFECT SETUP
MAP / OUT FILTER EG LFO
SETUP METER EFFECT EXT CTRL
SAMPLE SEQUENCE VOLUME DISK
PANEL PLAY SEQUENCE MASTER SYSTEM
Knob 1
Use this page to set the program's overall output level, its transposition, and its sample/
hold speed.
Change Page
• Turn the knob to change to a different page within the SETUP function. Available
pages are: PgmMstr (this page), Portmnt, ADSetup, and ADOut.
• Push the knob to move to the Program/Sample Selection screen. ( 95)
Level
Turn the knob to set the program's overall output level.
Transpose
Use this setting to transpose the program up or down, in semitone increments. The
transposition operates by raising or lowering all samples used by the program.
Note that each sample's keyboard range also transposes by an equivalent amount. If a
sample's keyboard range is set to C3 through B3, for example, then transposing the
program by -12 will shift the range for the sample to C2 through B2, so that striking key
C2 will produce the sound originally associated with key C3.
CONTROL
MIDI / CTRL
Turn Knob 1 to select PgmMstr.
MONITOR
IMPORT
MIDI
Knob 2 Knob 3
- -
= 0,...,127
= -127,...,+127
Knob 4 Knob 5
-
- -
Select P/S