Loading Data From Disk - Yamaha A3000 Owner's Manual

Loading Data from Disk

The section shows you to reload the saved disk data back into the A3000.
Procedure
Select DISK mode, DISK function.
1.
If necessary, turn Knob 1 to select the Disk page.
Be sure that Disk is set to New FD. If necessary, turn Knob 2 or Knob 3 to
2.
change the setting to this value.
Press the fourth (VOLUME) function key.
3.
Press Knob 4 (>LOAD).
4.
Press Knob 5 (>YES).
5.
PLAY
PROGRAM SAMPLE
EDIT
TRIM / LOOP MAP / OUT
RECORD SETUP
REC
PROGRAM SAMPLE
DISK
TOTAL EQ PANEL PLAY
UTILITY
The screen now looks like this.
The Volume screen appears.
The following confirmation prompt appears.
The A3000 starts to load the data. The original screen reappears when loading is
finished.
Saving and Reloading Your Data
EASY EDIT EFFECT SETUP CONTROL
FILTER EG LFO MIDI / CTRL
METER EFFECT EXT CTRL MONITOR
SEQUENCE VOLUME DISK IMPORT
SEQUENCE MASTER SYSTEM MIDI
Chapter 2 Trying It Out
67