Yamaha A3000 Owner's Manual page 158

COMMAND Pages
Knob 3
Knob 4
Chapter 5 EDIT Mode
156
Curve = -exponent, linear, +exponent
This setting selects the curve type for the fade. Three types are available, as illustrated
below.
Fade-In Curves
-exponent
Level
Time
Fade-Out Curves
-exponent
Level
Time
Length 0,...,( end address - start address )
Turn the knob to set the length for the fade, in "address" units. The minimum length is
0 (no fade). The maximum length is equal to the entire playback length of the waveform
(the length from the start address to the end address).
Note again that fade-in always begins from the start address, while fade-out always ends
at the end address.
linear +exponent
Level
Time
linear +exponent
Level
Time
Level
Time
Level
Time