Fd_Fmt (Format A Floppy Disk) - Yamaha A3000 Owner's Manual

COMMAND Pages

FD_FMT (Format a Floppy Disk)

Formats a floppy disk.
PLAY PROGRAM
EDIT TRIM / LOOP
REC RECORD
DISK PROGRAM
UTILITY TOTAL EQ
Turn action
Push action
Knob 1
Knob 2
Knobs 4, 5
Chapter 7 DISK Mode
258
SAMPLE EASY EDIT EFFECT SETUP
MAP / OUT FILTER EG LFO
SETUP METER EFFECT EXT CTRL
SAMPLE SEQUENCE VOLUME DISK
PANEL PLAY SEQUENCE MASTER SYSTEM
Knob 1
Use this command to format a floppy disk.
Important
• Formatting a disk causes loss of all data existing in that disk.
• You cannot format a floppy disk if the disk's "write protect" tab is enabled (if the
"window" on the disk casing is open).
FYI
The A3000's uses MS-DOS–compatible floppy-disk format.
Change Page
• Turn the knob to change to a different command page.
• Push the knob when you are ready to execute the format. The A3000 returns a confir-
mation screen. Push Knob 5 (>YES) to proceed with the format, or Knob 4 (>NO) to
cancel.
Type
• Use this knob to specify the disk type.
• Be sure that the setting matches the type of the disk you are using. Do not use 2HD
format on a 2DD disk, or 2DD format on a 2HD disk.
If you wish to change the name for the floppy disk, push Knob 4 or Knob 5 to proceed to
the name editing screen. For information about how to edit name strings, see "Entering
Names" ( 88).
CONTROL
MIDI / CTRL
Press the COMMAND key, then turn Knob 1 to select >FD_FMT.
MONITOR
IMPORT
MIDI
Knob 2 Knob 3
-
- -
= 2HD, 2DD
Knob 4 Knob 5
- -
>FD_FMT
Name