Loadsys (Load System Settings) - Yamaha A3000 Owner's Manual

LOADSYS (Load System Settings)

Loads system environment from disk.
PLAY PROGRAM SAMPLE EASY EDIT
EDIT TRIM / LOOP MAP / OUT FILTER
REC RECORD SETUP METER
DISK PROGRAM SAMPLE SEQUENCE
UTILITY TOTAL EQ PANEL PLAY SEQUENCE
Turn action
Push action
Use this command to reload a system environment that you saved using the >SAVESYS
command ( 284). This operation replaces the current environment (all system set-
tings) with the saved environment.
For a complete listing of the system parameters, refer to Table 2, "System Parameters,"
in the "MIDI data format" section of the Appendix. ( 352).
Knob 1 Change Page
• Turn the knob to change to a different command page.
• Push the knob to execute the load. The A3000 returns a confirmation screen. Push
Disk
Knobs 2, 3
Turn either knob to select the disk (partition) containing the environment that you
want to load.
EFFECT SETUP CONTROL
EG LFO MIDI / CTRL
EFFECT EXT CTRL MONITOR
VOLUME DISK IMPORT
MASTER SYSTEM MIDI
Knob 1 Knob 2
-
Knob 5 (>YES) to proceed, or Knob 4 (>NO) to cancel.
= disk (partition) name
Press the COMMAND key, then turn Knob 1 to select >LOADSYS.
Knob 3 Knob 4
-
- -
>LOADSYS
Chapter 8
COMMAND Pages
Knob 5
-
-
UTILITY Mode
285