Yamaha A3000 Owner's Manual page 271

Knob 1 Change Page
• Turn the knob to change to a different page within the DISK function. Available
pages are: Disk (this page), Config, and SelfID.
• Push the knob to move to the Program/Sample Selection screen. ( 95)
Disk
Knobs 2, 3
• Turn either knob to select the disk (partition) containing the objects (samples, pro-
grams, or sequences) that you want to load into main memory. Whenever you ex-
ecute a load, the A3000 always take the data from the disk (partition) that you select
here. In most cases you will also use this disk (partition) as the destination for your
data saves (although you are free to select a different disk when making the save.)
• If you select a floppy disk, the disk type (2HD or 2DD) is indicated on the lower right
of the screen.
• If you select a SCSI disk (or any other interconnected SCSI device), the device's ID
appears on the lower right side of the screen.
• Push either knob if you want to change the name of the selected disk (partition). The
A3000 then displays the name-editing screen. For information about how to edit
name strings, see "Entering Names" ( 88).
= disk (partition) name
DISK Function
Select P/S
Edit the Name
Chapter 7 DISK Mode
269