Copy - Yamaha A3000 Owner's Manual

COMMAND Pages

COPY

Copies all program data from selected program into destination program, resulting in two copies of the same
program.
PLAY PROGRAM
EDIT TRIM / LOOP
REC RECORD
DISK PROGRAM
UTILITY TOTAL EQ
Turn action
Push action
Knob 1
Knobs 2, 3
Knobs 4, 5
Chapter 4 PLAY Mode
102
SAMPLE EASY EDIT EFFECT SETUP
MAP / OUT FILTER EG LFO
SETUP METER EFFECT EXT CTRL
SAMPLE SEQUENCE VOLUME DISK
PANEL PLAY SEQUENCE MASTER SYSTEM
Knob 1
Use this page to copy (replicate) a program. The A3000 copies all data from the selected
memory-resident program into the destination memory-resident program. Following
the copy, the two programs will have identical data but different program numbers.
Change Page
• Turn the knob to change to a different command page.
• Push the knob to execute the copy. The A3000 returns a confirmation screen. Push
Knob 5 (>YES) to complete the copy, or Knob 4 (>NO) to cancel.
Program
Turn either knob to select the program that you want to copy.
To
Turn either knob to select the destination program number.
CONTROL
MIDI / CTRL
Press the COMMAND key, then turn Knob 1 to select >COPY.
MONITOR
IMPORT
MIDI
Knob 2 Knob 3
- -
= 001,...,128
= 001,...,128
Knob 4 Knob 5
- -
>COPY