Total Eq - Width - Yamaha A3000 Owner's Manual

TOTAL EQ Function

TOTAL EQ - Width

Sets the equalizer band widths.
PLAY PROGRAM
EDIT TRIM / LOOP
REC RECORD
DISK PROGRAM
UTILITY TOTAL EQ
Turn action
Push action
Knob 1
Knob 3
Knob 4
Knob 5
Chapter 8 UTILITY Mode
290
SAMPLE EASY EDIT EFFECT SETUP
MAP / OUT FILTER EG LFO
SETUP METER EFFECT EXT CTRL
SAMPLE SEQUENCE VOLUME DISK
PANEL PLAY SEQUENCE MASTER SYSTEM
Knob 1
Use this page to set the equalizer's low, middle, and high band widths.
Change Page
• Turn the knob to change to a different page within the TOTAL EQ function. Available
pages are: Gain, Freq, and Width (this page).
• Push the knob to move to the Program/Sample Selection screen. ( 95)
Low
• Sets the band width for low-frequency equalization.
• Note that lower values produce greater width.
Middle
• Sets the band width for mid-frequency equalization.
• Lower values produce greater width.
High
• Sets the band width for high-frequency equalization.
• Lower values produce greater width.
CONTROL
MIDI / CTRL
Turn Knob 1 to select Width.
MONITOR
IMPORT
MIDI
Knob 2 Knob 3
-
- -
= 1.0,...,12.0
= 1.0,...,12.0
= 1.0,...,12.0
Knob 4 Knob 5
- -
Select P/S