Connecting The A3000 Outputs - Yamaha A3000 Owner's Manual

Connecting the A3000 Outputs

Connecting the A3000 Outputs
This section explains how to connect the A3000 audio outputs to external devices.
Connecting the Analog Outputs
Chapter 1 Setting Up
22
Important
• Be sure that power to the A3000 and to peripheral devices is OFF before making these
connections. Connecting devices while power is ON may result in damage to amps or
speakers.
• Digital I/O connections are available only if the optional AIEB1 board is installed.
The A3000 comes standard with the following stereo output jacks.
STEREO OUT
ASSIGNABLE OUT
If you have installed the optional I/O expansion board (AIEB1 board), your A3000 will
include three additional ASSIGNABLE OUT pairs (ASSIGNABLE OUT jacks 1 to 6).
For monaural output:
A3000 Rear Panel
ASSIGNABLE OUT
R L
Main analog output.
You can set the jacks to operate independently of the STEREO
OUT jacks, so that they output selected samples or programs
only. The feature is useful, for example, when you want to send
the main signal to one audio device while sending a specific
sample to a different device. But it is also possible to set these
jacks so that they output the same signal as the STEREO OUT
jacks. ( 299)
STEREO OUT
R L/MONO
Amp, mixer, etc.
INPUT