Yamaha A3000 Owner's Manual page 68

Saving and Reloading Your Data
Chapter 2 Trying It Out
66
Procedure
Select PLAY mode.
1.
Function selection is not significant (you can execute this operation regardless of the
selected function), but in this case let's select PROGRAM.
PLAY
PROGRAM
EDIT
TRIM / LOOP
RECORD
REC
PROGRAM
DISK
TOTAL EQ
UTILITY
Press the COMMAND key.
2.
Turn Knob 1 to select the >SAVE screen.
3.
The screen should now look like this.
Be sure that Type is set to All(wipe). If necessary, turn Knob 2 to change the
4.
setting to this value.
Be sure that To is set to Dsk:"New FD". If necessary, turn Knob 3 or Knob 4
5.
to change the setting to this value.
Press Knob 1 (>SAVE).
6.
The following confirmation prompt appears.
Press Knob 5 (>YES).
7.
The A3000 starts to save the data. Please wait until the original screen returns, indi-
cating that the save is finished.
SAMPLE EASY EDIT EFFECT SETUP
MAP / OUT FILTER EG LFO
SETUP METER EFFECT EXT CTRL
SAMPLE SEQUENCE VOLUME DISK
PANEL PLAY SEQUENCE MASTER SYSTEM
CONTROL
MIDI / CTRL
MONITOR
IMPORT
MIDI