Sample Function; Sample - Smpsel (Select Sample) - Yamaha A3000 Owner's Manual

SAMPLE Function

SAMPLE - SmpSel (Select Sample)

Selects sample (or sample bank) for playback or editing, or saves data to disk.
PLAY PROGRAM
EDIT TRIM / LOOP
REC RECORD
DISK PROGRAM
UTILITY TOTAL EQ
Turn action
Push action
Knob 1
Knobs 2, 3
Chapter 4 PLAY Mode
112
SAMPLE Function
This section describes the PLAY-mode SAMPLE function. You can use this function to
assign samples to programs, to save samples to disk, and to build sample banks.
SAMPLE EASY EDIT EFFECT SETUP
MAP / OUT FILTER EG LFO
SETUP METER EFFECT EXT CTRL
SAMPLE SEQUENCE VOLUME DISK
PANEL PLAY SEQUENCE MASTER SYSTEM
Knob 1
Use this page to assign samples to the current program, to select samples for editing, or
to save the selected sample to disk.
Change Page
• Turn the knob to change to a different page within the SAMPLE function. Available
pages are: SmpSel (this page), SmpBank, ToBank, and SmpSort.
• Push the knob to move to the Program/Sample Selection screen. ( 95)
Sample
• Turn either knob to select a sample (or sample bank) for program assignment or disk
save. Once you have selected the sample, you can use Knob 4 to assign it to (or de-
assign it from) the current program, and you can use Knob 5 to save it to disk.
If you select a sample bank, a [B] mark appears in front of the name. If you select a
stereo sample, an [S] mark appears in front of the name.
If you select a new or edited sample that has not yet been saved to disk in its current
form, an [E] ("edited") mark appears to the right of the name.
• If you wish to set or change the sample name, push either knob to proceed to the
name-editing screen. For information about how to edit name strings, see "Entering
Names" ( 88).
CONTROL
MIDI / CTRL
Turn Knob 1 to select SmpSel.
MONITOR
IMPORT
MIDI
Knob 2 Knob 3
= sample name
Knob 4 Knob 5
-
-
Select P/S
Edit the Name