Chapter 6 Recording Mode Recording Mode - Yamaha A3000 Owner's Manual

RECORDING Mode
You use RECORDING mode to set up for and carry out recording of new samples.
RECORDING Functions
Chapter 6 RECORDING Mode
220
RECORDING Mode
RECORDING mode comprises the six functions described below.
RECORD
Use this function to record a new sample. ( 223).
SETUP
Use this function to set up for a new recording. You can set a wide variety of setup
parameters: input source, input level, sample's original key and key range, recording
start trigger, recording end trigger, automatic normalization, and others. ( 227)
METER
Use the METER function to check the input level, and to set the recording trigger levels.
( 236)
EFFECT
This function sets the effects applied to the signal as it is recorded. ( 238)
EXT CTRL (External Control)
This function lets you control playback from an audio CD mounted in a SCSI drive. Use
this function when you are recording from a CD. ( 241)
MONITOR
This function sets up the monitoring feature, so that you can monitor the input signal
as you record it. You can also use the function to set up a metronome. ( 220)