Related Manuals for Yamaha Audiogram3
Summary of Contents for Yamaha Audiogram3
- Page 1 USB AUDIO INTERFACE AUDIOGRAM 3 Owner’s Manual Bedienungsanleitung Owner’s Manual Mode d’emploi Manual de instrucciones Руководство пользователя 取扱説明書 C0 (10.11.30) AUDIOGRAM 3 Owner’s Manual...
- Page 2 Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received including interference that may cause undes- ired operation. See user manual instructions if interference to radio reception is suspected.
- Page 3 * Please keep this manual in a safe place for future reference. WARNING Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not...
- Page 4 Always unplug the USB cable from a computer or turn off the computer to turn off the device when the device is not in use. The performance of components with moving contacts, such as switches, volume controls, and connectors, deteriorates over time.
-
Page 5: Table Of Contents
Please read through this manual carefully before beginning use, so that you will be able to take full advantage of your interface’s superlative features and enjoy trouble-free operation for years to come. -
Page 6: Features
Cubase AI software, included in the AUDIOGRAM package, offers versatile, high-performance hard- disk recording capability. 48V Phantom Power (page 18) A PHANTOM switch supplies +48V phantom power to the channel 1 microphone input, so you can use high-quality phantom-powered condenser microphones for superior recording quality. Accessories •... -
Page 7: Setup
+48V switch (★) on when using a phantom-powered condenser microphone. Microphone Keyboard, etc. Audio system Headphones Cubase AI USB cable Computer To connect a device such as a microphone: To connect an instrument such as an electric guitar or bass: AUDIOGRAM 3 Owner’s Manual... -
Page 8: Quick Guide
Cubase AI for recording and mixdown. While going through this section you might find it useful to also refer to the “Controls and Functions” section on page 18, as well as the pdf manual supplied with the Cubase AI software. -
Page 9: Powering Up The System
Step Powering Up the System To prevent loud pops and noises, turn on the power to your sound gear starting with the sources (instruments, CD players, etc.) and ending with the audio system (monitor speakers). Turn on the instruments and microphones. -
Page 10: Adjusting Level
Cubase AI Setup Set the computer output to the maximum level. For details on how to make the setting refer to the “The recorded sound is too low in level.” section in the “Troubleshooting” on page 20. Launch Cubase AI. - Page 11 Select [VST Audio System] in the [Devices] field on the left side of the window. Select [ASIO DirectX Full Duplex Driver] in the [ASIO Driver] field on the right side of the window. A dialog box will appear asking “Do you want to switch the ASIO driver?”. Click [Switch].
- Page 12 Windows: The ASIO Direct Sound Full Duplex Setup dialog box will be displayed. Check only the input port and output port [USB Audio CODEC] checkbox, and then click [OK] to close the dialog window.
- Page 13 Click in the track list (the area in which the track names are displayed) to select a track to record on. The various settings for the selected track are available in the Inspector on the left side of the display. Track list...
- Page 14 <Transport panel> Clipping indicator Specify the point at which you want to start recording via the ruler at the top of the win- dow for the project. Click the black area of the ruler to move the project cursor (the vertical black line) to that position.
- Page 15 Select [Mixer] from the [Devices] menu to open the Mixer window. The overall playback level will be displayed via the master section bus level meter on the right side of the mixer window, and the channel level will be displayed via the channel strip level meter.
-
Page 16: Mixing With Cubase Ai
Mixing with Cubase AI In this section we’ll try mixing down multiple recorded audio tracks to stereo, and creating an audio file. Mixes can be stored as WAV or AIFF files, which can then be recorded to audio CDs. Launch Cubase AI and open a project file. - Page 17 Enter a file name and select a destination for the file as well as a file type. If you intend to use the file to create an audio CD, select the WAV file type (AIFF on Mac OS X), 44.1 kHz, and 16 bit.
-
Page 18: Controls And Functions
Control Panel PHANTOM +48V Switch/Indicator LEVEL Controls This switch toggles phantom power on and Adjusts the level of the channel signal. Use off. If you set the switch on ( ), the these controls to adjust the balance AUDIOGRAM supplies phantom power to between the channels. -
Page 19: Input Signal Flow
XLR-type Phone-type STEREO OUT Jacks These output the mixed signal from chan- nels 1 and 2. The output level can be You can directly connect an elec- NOTE adjusted using the OUT LEVEL control. tric guitar or bass without the... -
Page 20: Troubleshooting
Are you using a USB hub? USB hubs can interfere with proper operation, so try connecting the AUDIOGRAM interface directly to a USB port on the computer. If the computer has multiple USB ports, try a different USB port. ❑... - Page 21 1. Select [System Preferences ...] from the Apple menu and then select “Sound” to open the “Sound” dialog window. 2. Click the “Output” tab and set the volume slider at the bottom of the window to its maximum level. 3. Click the “Sound Effect” tab and set the volume slider of the “Alert volume” slider to its mini- mum level.
- Page 22 Are you playing back a large number of audio tracks? The number of tracks you can play at the same time will depend on the performance of the com- puter you are using. You may experience intermittent playback if you exceed your computer’s capabilities.
-
Page 23: Dimensional Diagrams
USB 1.1 44.1/48 kHz, 16 bit Controls MIC/INST Switch MIC: for microphones INST (Hi-Z): for guitars, etc. LEVEL Control Adjust the level of CH 1, 2 PHANTOM +48V Switch 48 V, only for CH1 OUT LEVEL Control Adjusts the overall signal Indicators... -
Page 24: Specifications
Specifications ■ Block Diagram and Level Diagram STEREO STEREO AUDIOGRAM 3 Owner’s Manual... -
Page 25: About The Accessory Disk
Internet. Click the “Register Now” button software. shown when the software is started, then •... - Page 26 Niederlassung und bei Yamaha Vertragshändlern in den jeweiligen Bestimmungsländern erhältlich. Pour plus de détails sur les produits, veuillez-vous adresser à Yamaha ou au distributeur le plus proche de vous figurant dans la liste suivante. Para detalles sobre productos, contacte su tienda Yamaha más cercana o el distribuidor autorizado que se lista debajo.