Yamaha A3000 Owner's Manual page 56

Sample Editing
Using a Filter
Chapter 2 Trying It Out
54
We will now set up a filter for the eeeee sample. The filter settings should produce a
significant change in the sample's sound.
Procedure
1. Select EDIT mode, and then select the FILTER function.
PLAY
PROGRAM
EDIT
TRIM / LOOP
RECORD
REC
PROGRAM
DISK
TOTAL EQ
UTILITY
Press Knob 1, and then turn Knob 2 or Knob 3 to select the Voice EE sample
2.
for editing. Then press Knob 1 again.
Turn Knob 1 to select the Filter screen. Then turn Knob 2 to set Type to HiPass1.
3.
Turn Knob 3 to set Cutoff to 100.
The screen should now look like this.
Now play a key between C3 and B3 at your keyboard.
4.
Notice how the filter has eliminated the low-frequency components of the eeeee sound.
Memo
The A3000 offers a variety of filter types. You can select from among two high-pass filters (HiPass1,
HiPass2), two low-pass filters (LowPass1, LowPass2), a band-pass filter (BandPass), and a band-
eliminate filter (BandElim).
SAMPLE EASY EDIT EFFECT SETUP
MAP / OUT FILTER EG LFO
SETUP METER EFFECT EXT CTRL
SAMPLE SEQUENCE VOLUME DISK
PANEL PLAY SEQUENCE MASTER SYSTEM
CONTROL
MIDI / CTRL
MONITOR
IMPORT
MIDI