Import - Impvce (Import A Voice) - Yamaha A3000 Owner's Manual

IMPORT Function

IMPORT - ImpVce (Import a voice)

Imports a foreign voice or program.
PLAY PROGRAM
EDIT TRIM / LOOP
REC RECORD
DISK PROGRAM
UTILITY TOTAL EQ
Turn action
Push action
Knob 1
Knobs 2, 3
Chapter 7 DISK Mode
274
SAMPLE EASY EDIT EFFECT SETUP
MAP / OUT FILTER EG LFO
SETUP METER EFFECT EXT CTRL
SAMPLE SEQUENCE VOLUME DISK
PANEL PLAY SEQUENCE MASTER SYSTEM
Knob 1
Use this page to import a voice created at a Yamaha A7000, or a "program" created at
another machine type or purchased over-the-counter on floppy disk or CD-ROM. The
A3000 imports the object into a sample bank.
FYI
Some of the parameters in the original object may not be preserved by the A3000. In
some cases, the A3000 may be unable to load some of the component samples from the
original object. Changes in pitch or other sound characteristics may occur.
Change Page
• Turn the knob to change to a different page within the IMPORT function. Available
pages are: ImpSmp, ImpVce (this page), and ImpOthr.
• Push the knob to move to the Program/Sample Selection screen. ( 95)
Voice, Program Name = voice name or program name
• Turn either knob to select the foreign voice or program that you want to import.
• The letter to the right of the name identifies the type of foreign object that you have
selected. Note that all of these objects become sample banks at the A3000 side.
Indications are as follows.
V
D
P
CONTROL
MIDI / CTRL
Turn Knob 1 to select ImpVce.
MONITOR
IMPORT
MIDI
Knob 2 Knob 3
- -
A7000 normal voice
A7000 drum voice
"Program"
Knob 4 Knob 5
- -
-
Select P/S