Yamaha A3000 Owner's Manual page 139

Yamaha professional sampler owner's manual a3000
Hide thumbs Also See for A3000:
Table of Contents

Advertisement

Knob 1
Change Page
• Turn the knob to change to a different page within the CONTROL function. Available
pages are: PgmCtl1 (this page), PgmCtl2, and Reset.
• Push the knob to move to the Program/Sample Selection screen. ( 95)
Matrix#
Knob 2
Selects the matrix entry for editing. You can use the matrix to set up four controllers.
Each matrix entry sets up a different controller.
Device
Knob 3
Use this setting to select the external physical controller that you want to set for opera-
tion with the A3000. The setting selects one of the controllers on your external MIDI
device. You can then use Knob 4 (and also the PgmCtl2 page) to determine how this
controller affects the playback of this program.
You select the controller by its controller number (sometimes called control-change
number). Each controller number identifies a specific controller, as set forth in the
MIDI standard.
In addition, you may also select PB (pitchbend) and AT (aftertouch) controls. The MIDI
standard defines these controls differently from the others, so they do not have their
own controller numbers.
Most MIDI devices are equipped with the following physical controllers.
Controller
Modulation wheel
Breath controller
Foot controller
Volume controller
Expression pedal
You are free to select any of the above controllers, or any other of the controllers (con-
trol numbers) available on your equipment. You should generally avoid controller num-
bers 000 and 032, however, as many MIDI devices use these numbers for bank selection
purposes.
You can input your controller-number selection directly from your MIDI keyboard. First
press Knob 2 so that the indicator lamp (directly above the knob) begins blinking, and
then operate the appropriate controller at the keyboard. The controller's controller
number will then appear on the screen directly above the knob. Push the knob again (or
move to another page) to terminate this MIDI-entry mode and register the new setting.
= 1,...,4
= 000,...,120, AT, PB
Controller Number
001
002
004
007
011
CONTROL Function
Select P/S
MIDI IN
Chapter 4
PLAY Mode
137

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents