Control - Reset (Controller Reset) - Yamaha A3000 Owner's Manual

CONTROL - Reset (Controller Reset)

Selects whether controllers initialize when you switch into this program.
PLAY PROGRAM SAMPLE EASY EDIT
EDIT TRIM / LOOP MAP / OUT FILTER
REC RECORD SETUP METER
DISK PROGRAM SAMPLE SEQUENCE
UTILITY TOTAL EQ PANEL PLAY SEQUENCE
Turn action
Push action
This page selects how controllers are set when you switch into this program from an-
other program. You can choose to retain the previous control-change values, or else to
temporarily reset these values to 0. You can set the operation separately for each MIDI
channel.
For more information, refer to the supplementary explanation on the next page.
Knob 1 Change Page
• Turn the knob to change to a different page within the CONTROL function. Available
• Push the knob to move to the Program/Sample Selection screen. ( 95)
MIDICh
Knob 2
Selects the MIDI Receive Channel. After selecting the channel, you can use Knob 3 to
select whether controllers are reset for the samples that play on that channel (see next
page).You can then repeat this sequence as necessary: Use Knob 2 to select another
channel, then use Knob 3 to enable or disable controller reset for that channel.
CtlReset
Knob 3
Selects whether the controller control-change values currently set for the previous pro-
gram reinitialize to 0 when you switch into this program. You can set the operation
separately for each MIDI Receive Channel.
off
on
EFFECT SETUP CONTROL
EG LFO MIDI / CTRL
EFFECT EXT CTRL MONITOR
VOLUME DISK IMPORT
MASTER SYSTEM MIDI
Knob 1 Knob 2
-
pages are: PgmCtl1, PgmCtl2 and Reset (this page).
= 1,...,16
= off, on
Maintain previous values.
Return values to 0.
CONTROL Function
Turn Knob 1 to select Reset.
Knob 3 Knob 4
-
- -
Select P/S
Chapter 4
Knob 5
-
-
PLAY Mode
141