Connecting the Audio Inputs
This section explains how to connect the A3000 to a microphone, cassette recorder, or
other sound source.
Important
• Be sure that power to the A3000 and to peripheral devices is OFF before making these
• Digital I/O connections are available only if the optional AIEB1 board is installed.
• To select the input to be used for recording, use the Input parameter on the RecData
Connecting to Analog Input
The following illustrations show how to connect to an analog input source, such as a
microphone, analog tape recorder, or analog synthesizer.
For monaural input
connections. Connecting devices while power is ON may result in damage to amps or
speakers.
page ( 227).
Microphone, etc.
Tape recorder, synth, etc.
OUTPUT
Connecting the Audio Inputs
A3000 Front Panel
INPUT
L
R
A3000 Front Panel
INPUT
L
R
Chapter 1
Setting Up
25