Specifications - Yamaha A3000 Owner's Manual

Specifications

Appendix
332
Specifications
Tone generation method
AWM2 tone generator
Polyphony
64 notes, 16 multis, layering
Key assignment
Last-note priority, dynamic voice allocation, mono-mode supported
A/D conversion
16 bit delta-sigma type 64-times oversampling
D/A conversion
18 bit 4-times oversampling
Digital I/O (only when AIEB1 I/O expansion board is installed)
Input/output
Input frequency
Output frequency
Sampling frequency
Analog input
Digital input (only when AIEB1 I/O expansion board is installed)
Internal sample memory capacity
Standard
Maximum
DIGITAL connectors S/P-DIF (coaxial)
OPTICAL connectors S/P-DIF (optical)
48 kHz, 44.1 kHz, 32 kHz
44.1 kHz
44.1, 22.05, 11.025 kHz, 5.5125 kHz (mono and stereo)
48 kHz, 44.1 kHz, 32 kHz external synchronized recording (stereo only)
1/2, 1/4 and 1/8 undersampling is supported
2 Mbytes (installed on-board)
128 Mbytes
(When four 32 Mbyte 72 pin SIMM modules are installed. The
on-board 2 Mbytes are unused only if memory has been expanded
to the maximum.)