Yamaha A3000 Owner's Manual page 188

FILTER Function
Knob 1
Knob 2
Knob 3
Knob 4
Knob 5
Chapter 5 EDIT Mode
186
Change Page
• Turn the knob to change to a different page within the FILTER function. Available
pages are: Filter, FltSens, FltScale (this page), and EQ.
• Push the knob to move to the Program/Sample Selection screen. ( 95)
Cutoff1 = -127,...,127
Sets the Cutoff1 cutoff frequency.(See illustration on preceding page.)
BP1 = C-2,...,( BP2 - 1 semitone )
• Selects Breakpoint 1.
• Push the knob if you want to set the value using an external MIDI device. The knob
indicator begins blinking, indicating that the A3000 is ready to receive MIDI input.
Transmit the appropriate note value, then lock the setting in by pressing the knob
again (or else press a different MIDI IN knob, or change to a different screen).
BP2
= ( C-2 + 1 semitone ),...,G8
• Selects Breakpoint 2.
• Push the knob if you want to set the value using an external MIDI device. (See expla-
nation directly above.)
Cutoff2 = -127,...,127
Sets the Cutoff2 cutoff frequency.
Select P/S
MIDI IN
MIDI IN