Pgmdump (Program Dump) - Yamaha A3000 Owner's Manual

PGMDUMP (Program Dump)

Transmits a bulk dump of the selected program.
PLAY PROGRAM SAMPLE EASY EDIT
EDIT TRIM / LOOP MAP / OUT FILTER
REC RECORD SETUP METER
DISK PROGRAM SAMPLE SEQUENCE
UTILITY TOTAL EQ PANEL PLAY SEQUENCE
Turn action
Push action
Use this page to dump the selected memory-resident program to an external MIDI de-
vice. The dump operation transmits all of the program's data to the external device.
Important
Before you can transmit or receive a program dump, you must set matching device-
number values at the A3000 and the external device. ( 310)
Knob 1 Change Page
• Turn the knob to change to a different command page.
• Push the knob to execute the program dump. The A3000 returns a confirmation
Program
Knobs 2, 3
Turn either knob to select the program that you want to dump.
withRelated
Knob 4
Use this setting to select whether to include the program's samples in the dump.
• If you select off, the A3000 transmits program data only.
• If you select on, the A3000 transmits the program data together with all data from all
EFFECT SETUP CONTROL
EG LFO MIDI / CTRL
EFFECT EXT CTRL MONITOR
VOLUME DISK IMPORT
MASTER SYSTEM MIDI
Knob 1 Knob 2
-
screen. Push Knob 5 (>YES) to proceed, or Knob 4 (>NO) to cancel.
= 001,...,128
= off, on
samples used by the program. (Sample data is transmitted in A3000 proprietary for-
mat.)
Press the COMMAND key, then turn Knob 1 to select >PGMDUMP.
Knob 3 Knob 4
- -
>PGMDUMP
Chapter 4
COMMAND Pages
Knob 5
-
-
PLAY Mode
103