Effect - In&Out (Input/Output Levels And Pan) - Yamaha A3000 Owner's Manual

EFFECT Function
EFFECT - In&Out (Input/output levels and pan)
Sets input level, output level, and pan for each effect (Effects 1, 2, and 3).
PLAY PROGRAM
EDIT TRIM / LOOP
REC RECORD
DISK PROGRAM
UTILITY TOTAL EQ
Turn action
Push action
Knob 1
Knob 2
Knob 3
Knob 4
Knob 5
Chapter 4 PLAY Mode
126
SAMPLE EASY EDIT EFFECT SETUP
MAP / OUT FILTER EG LFO
SETUP METER EFFECT EXT CTRL
SAMPLE SEQUENCE VOLUME DISK
PANEL PLAY SEQUENCE MASTER SYSTEM
Knob 1
Use this page to set the input level, output level, and pan for each of the three effect
blocks (Effect 1, Effect 2, and Effect 3).
Change Page
• Turn the knob to change to a different page within the EFFECT function. Available
pages are: EfType, Efct1, Efct2, Efct3, In&Out (this page) and EdType.
• Push the knob to move to the Program/Sample Selection screen. ( 95)
Effect#
Turn the knob to select the effect block (Effect 1, 2, or 3) whose values you want to set.
You can then set the various values using Knobs 3, 4, and 5. You can repeat the sequence
to set each of the three effects: first select the effect block with Knob 2, then set the
values with Knobs 3, 4, and 5.
InLevel
Turn the knob to set the input level for the selected effect block.
OutLevel
Turn the knob to set the output level for the selected effect block.
Pan
Turn the knob to set the pan (stereo positioning) for the effect block's output. Positive
values set pan to the right; negative values set pan to the left.
If the effect output is stereo, higher absolute pan settings will narrow the stereo feeling
while noticeably shifting the sound position.
CONTROL
MIDI / CTRL
Turn Knob 1 to select In&Out.
MONITOR
IMPORT
MIDI
Knob 2 Knob 3
- -
= 1, 2, 3
= 0,...,127
= 0,...,127
= -63,...,+63
Knob 4 Knob 5
- -
Select P/S