Alldump (Data Dump) - Yamaha A3000 Owner's Manual

COMMAND Pages

ALLDUMP (Data Dump)

Dumps all data, or system data only.
PLAY PROGRAM
EDIT TRIM / LOOP
REC RECORD
DISK PROGRAM
UTILITY TOTAL EQ
Turn action
Push action
Knob 1
Knob 3
Chapter 8 UTILITY Mode
286
SAMPLE EASY EDIT EFFECT SETUP
MAP / OUT FILTER EG LFO
SETUP METER EFFECT EXT CTRL
SAMPLE SEQUENCE VOLUME DISK
PANEL PLAY SEQUENCE MASTER SYSTEM
Knob 1
-
Use this command to execute a MIDI bulk dump. The dump operation transmits A3000
memory-resident data to the connected MIDI device.
You can choose whether to dump all memory content, or system settings only.
Important
Before executing this operation, you must connect up the destination MIDI device, and
you must set appropriate "device number" values at each side. ( 310)
Change Page
Push the knob to start the dump. The A3000 returns a confirmation screen. Push Knob
5 (>YES) to proceed, or Knob 4 (>NO) to cancel.
Type
Select whether to transmit all data, or system data only.
all
system
CONTROL
MIDI / CTRL
Press the COMMAND key.
MONITOR
IMPORT
MIDI
Knob 2 Knob 3
-
- -
= all, system
Transmit all memory content (all programs, all samples, all se-
quences, and all system data).
Transmit system settings only.
Knob 4 Knob 5
- -
- -
>ALLDUMP