Sound Check - Yamaha A3000 Owner's Manual

Sound Check

The next procedure takes you though a simple sound check that you can use to confirm proper
connection of external audio and MIDI devices. The procedure assumes that you are using a MIDI
keyboard to control A3000 playback.
Chapter 1 Setting Up
32
Sound Check
Procedure
Switch on power to all devices as described above.
1.
Turn the MASTER VOL knob on the front panel to approximately middle position.
2.
Adjust the volume of the speakers or amplifiers.
3.
Set the Transmit Channel of your controlling MIDI keyboard to "1".
4.
The A3000's "Basic Receive Channel" is set to "1" at time of shipping. This means that
the A3000 is set to receive data over MIDI Channel 1.
Confirm that the PLAY-mode lamp is lit.
5.
If necessary, press the PLAY button so that the lamp comes on.
PLAY
PROGRAM
EDIT
TRIM / LOOP
RECORD
REC
PROGRAM
DISK
TOTAL EQ
UTILITY
Press the second function key (counting from the left).
6.
PLAY
PROGRAM
EDIT
TRIM / LOOP
RECORD
REC
PROGRAM
DISK
TOTAL EQ
UTILITY
SAMPLE EASY EDIT EFFECT SETUP
MAP / OUT FILTER EG LFO
SETUP METER EFFECT EXT CTRL
SAMPLE SEQUENCE VOLUME DISK
PANEL PLAY SEQUENCE MASTER SYSTEM
SAMPLE EASY EDIT EFFECT SETUP
MAP / OUT FILTER EG LFO
SETUP METER EFFECT EXT CTRL
SAMPLE SEQUENCE VOLUME DISK
PANEL PLAY SEQUENCE MASTER SYSTEM
CONTROL
MIDI / CTRL
MONITOR
IMPORT
MIDI
CONTROL
MIDI / CTRL
MONITOR
IMPORT
MIDI