Knob 1
Change Page
• Turn the knob to change to a different page within the MAP/OUT function. Available
pages are: KeyRnge, VelRnge, Lvl&Mode, Output, Pitch, Expand, and LvlScale (this
page).
• Push the knob to move to the Program/Sample Selection screen. ( 95)
Level1
Knob 2
Sets the Level1 output level. (See illustration on preceding page.)
BP1
Knob 3
• Selects Breakpoint 1.
• Push the knob if you want to set the value using an external MIDI device. The knob
indicator begins blinking, indicating that the A3000 is ready to receive MIDI input.
Transmit the appropriate note value, then lock the setting in by pressing the knob
again (or else press a different MIDI IN knob, or change to a different screen).
BP2
Knob 4
• Selects Breakpoint 2.
• Push the knob if you want to set the value using an external MIDI device. (See expla-
nation directly above.)
Level2
Knob 5
Sets the Level2 output level.
= 0,...,127
= C-2,...,( BP2 - 1 semitone )
= ( C-2 + 1 semitone ),...,G8
= 0,...,127
MAP/OUT Function
Select P/S
MIDI IN
MIDI IN
Chapter 5
EDIT Mode
181