Sample Editing - Yamaha A3000 Owner's Manual

Sample Editing

In this section we will try out further editing on your ahhhh, eeeee, and ohhhh samples.
Using Loops
Chapter 2 Trying It Out
52
Sample Editing
We will now set up a loop for the ahhhh sample. The sample will then play out continu-
ously when you hold down an appropriate key at the MIDI keyboard.
Procedure
Select EDIT mode, and then select the TRIM/LOOP function.
1.
PLAY
PROGRAM
EDIT
TRIM / LOOP
RECORD
REC
PROGRAM
DISK
TOTAL EQ
UTILITY
Press Knob 1, and then turn Knob 2 or Knob 3 to select the Voice AH sample
2.
for editing. Then press Knob 1 again.
Turn Knob 1 to select the WvMode (wave mode) screen.
3.
The screen should now look like this.
Turn Knob 2 to set LpMode (loop mode) to – – –
4.
Press and hold the AUDITION key.
5.
You use the AUDITION key to play out the currently selected sample. Notice how the
sound loops: ahhhh, ahhhh, ahhhh. In the next few steps we will adjust the loop start
and end points to produce a smoother loop (ahhh-hhh-hhh).
SAMPLE EASY EDIT EFFECT SETUP
MAP / OUT FILTER EG LFO
SETUP METER EFFECT EXT CTRL
SAMPLE SEQUENCE VOLUME DISK
PANEL PLAY SEQUENCE MASTER SYSTEM
CONTROL
MIDI / CTRL
MONITOR
IMPORT
MIDI
O.