Yamaha A3000 Owner's Manual page 61

Turn Knob 2 or Knob 3 to set Program to 002:"Pgm 002".
2.
The screen should now look like this.
Try playing at the keyboard to see what happens.
3.
Nothing happens. Program 002 is still empty, since we have not yet assigned any sam-
ples to it. So we will now proceed to assign the three samples we have already created to
this new program.
Press the second (SAMPLE) function key.
4.
If necessary, turn Knob 1 until SmpSel appears at the lower left of the screen.
Turn Knob 2 or Knob 3 to select the Voice AH sample.
5.
Turn Knob 4 to set ToPgm to on.
6.
This setting selects Voice AH for use in this program.
Now turn Knob 2 or 3 to select the Voice EE sample, then turn Knob 4 to set
7.
ToPgm to on. Then turn Knob 2 or 3 again to select the Voice OH sample, and
again turn Knob 4 to set ToPgm to on.
All three samples are now selected for use with this program.
Try playing at the keyboard again.
8.
As with Program 001, keys from C2 to B2 produce the ahhhh sample, keys from C3 to
B3 play the eeeee sample, and keys from C4 to B4 play the ohhhh sample.
ProgramEditing
Chapter 2 Trying It Out
59