Volume Function; Volume - Volume - Yamaha A3000 Owner's Manual

VOLUME Function

VOLUME - Volume

Selects, loads, and creates volumes.
PLAY PROGRAM
EDIT TRIM / LOOP
REC RECORD
DISK PROGRAM
UTILITY TOTAL EQ
Turn action
Push action
Chapter 7 DISK Mode
266
VOLUME Function
You use the VOLUME function to select and manage disk volumes. Note that this func-
tion only allows access to the volumes on the currently selected disk (partition). To
change the disk selection, use the DISK function. ( 268)
For details about the relationship between disks, partitions, and volumes, refer to the
section entitled "Disks and Volumes" in Chapter 3. ( 81)
SAMPLE EASY EDIT EFFECT SETUP
MAP / OUT FILTER EG LFO
SETUP METER EFFECT EXT CTRL
SAMPLE SEQUENCE VOLUME DISK
PANEL PLAY SEQUENCE MASTER SYSTEM
Knob 1
-
Use this page to select a volume for saves and loads, to change the volume name, to
create a new volume, or to load all data from the selected volume to main memory.
Important
Floppy disks always hold a single volume only. The A3000 automatically creates this
volume at time of formatting, and gives it the name FD VOLUME. This name cannot be
changed.
CONTROL
MIDI / CTRL
MONITOR
IMPORT
MIDI
Knob 2 Knob 3 Knob 4 Knob 5
- -