Revert - Yamaha A3000 Owner's Manual

REVERT

Overwrites memory-resident sample with the disk version of the sample.
PLAY PROGRAM SAMPLE EASY EDIT
EDIT TRIM / LOOP MAP / OUT FILTER
REC RECORD SETUP METER
DISK PROGRAM SAMPLE SEQUENCE
UTILITY TOTAL EQ PANEL PLAY SEQUENCE
Turn action
Push action
This operation reloads the selected sample or sample bank from disk into memory,
canceling any new editing changes that you have made. This operation is available only
if you have already saved the object to disk.
You use this operation to cancel "errors" that you make when editing or re-recording a
sample. Assume, for example, that you record a sample, immediately save the results to
disk (as you should), and then start to edit. If you now make a significant error during
editing, you can use the REVERT command to restore the sample to its initial state. You
can then begin editing all over again.
Important
• This operation is available only if you have already saved your data to disk. Remem-
• This operation is not available with imported samples.
Knob 1 Change Page
• Turn the knob to change to a different command page.
• Push the knob to execute the reversion. The A3000 returns a confirmation screen.
EFFECT SETUP CONTROL
EG LFO MIDI / CTRL
EFFECT EXT CTRL MONITOR
VOLUME DISK IMPORT
MASTER SYSTEM MIDI
Knob 1 Knob 2
-
-
ber to save important data to disk before you make significant editing changes.
Push Knob 5 (>YES) to proceed, or Knob 4 (>NO) to cancel.
Press the COMMAND key, then turn Knob 1 to select >REVERT.
Knob 3 Knob 4
- -
- -
>REVERT
Chapter 5
COMMAND Pages
Knob 5
-
-
EDIT Mode
149