Setup Procedure
Setup Procedure
his chapter explains how to set up your equipment and run a simple sound check.
Setup Sequence
This chapter takes you through each of the steps necessary to connect up your system.
Connecting the Power
Explains how to connect up the A5000/A4000's power cord. (page 19)
Connecting the A5000/A4000 Outputs
Shows how to connect the A5000/A4000's stereo and assignable outputs to external audio devices.
(page 20)
Connecting the Audio Inputs
Shows how to connect microphones and other input devices to the A5000/A4000. (page 23)
MIDI Connections
Introduces basic MIDI concepts, and shows how to connect up MIDI devices. (page 25)
Power ON/OFF
Explains the proper sequence for turning connected devices on and off. (page 27)
Sound Check
Takes you through a simple sound check, to confirm that your equipment is connected correctly. (page
28)
• If you have already acquired and intend to install options such as addition SIMM memory, the
optional AIEB1 I/O Expansion Board, internal hard disk or ZIP disk drives, or external SCSI
devices, please install the options before carrying out the setup procedures described in this
chapter.
• SIMM (expansion memory) installation.....page 234
• AIEB1 I/O Expansion Board installation....page 237
• Internal SCSI hard disk installation ...........page 240
• Internal IDE hard disk installation .............page 244
• ATAPI ZIP drive installation .......................page 247
• External SCSI device connection..............page 251
18
Chapter 1 Setting Up
• A5000/A4000