Installation With Usb Connection - Seiko RP-E10 Operation Manual

The subsequent procedure varies depending on the connection method with the printer. For
the USB connection, proceed to "2.2.2 Installation". For the serial connection, proceed to
"2.2.3 Installation". For TCP/IP connection, proceed to "2.2.4 Installation". For using shared
printer, proceed to "2.2.5 Installation of the shared printer".

2.2.2 Installation with USB connection

This section continues to describe the installation procedure of the USB connection.
Caution
 For the USB connection, keep the printer power off until you are instructed to do so.
5. When the installation method selection window is displayed, select "Plug and play
install (Uses usb port)", and then click the [Next>] button.
6. When the installation confirmation window is displayed, click the [Next>] button to
start the installation.
7. When the printer driver registration completion window is displayed, use the USB
cable to connect the printer with the computer, and then turn the printer power on.
Screen 2-3 Select installation method (USB connection)
Screen 2-4 Confirm installation
2-3