Table of Contents
Advertisement
VIPA System SLIO
4.5 Hardware configuration - System SLIO module
System SLIO backplane
bus
Proceeding
HB300 | CPU | 013-CCF0R00 | en | 16-40
9.
Navigate in the hardware catalog to the directory 'PROFINET IO
è Additional field devices è I/O è VIPA SLIO System' and connect the IO device
'013-CCF0R00 CPU' to your PROFINET system.
ð In the slot overview of the PROFINET IO device 'VIPA SLIO CPU' the CPU is
already placed at slot 0. From slot 1 you can place your System SLIO modules.
To connect System SLIO modules, the CPU has a backplane bus, which must addition-
ally to be supplied. Here up to 64 System SLIO modules can be connected.
1.
Perform, if not already done, a hardware configuration for the CPU.
'Hardware configuration - CPU' on page 61
2.
Starting with slot 1 place in the slot overview of the PROFINET IO device "VIPA
SLIO CPU" your System SLIO modules in the plugged sequence.
3.
Parametrize if necessary the modules and assign valid addresses, so that they can
directly be addressed.
Deployment CPU 013-CCF0R00
Hardware configuration - System SLIO module
Ä Chapter 4.4
63
Advertisement
Table of Contents
