VIPA System SLIO
Parametrierung zur Lauf-
zeit
9.6 Deployment I/O periphery
9.6.1 Overview
Project engineering and
parametrization
9.6.2 Analog input
9.6.2.1
Overview
9.6.2.2
Parametrization in SPEED7 Studio
9.6.2.2.1
'I/O addresses'
Sub module
Input address
AI2
800
802
9.6.2.2.2
'Parameter'
'Filtering channel 0/1'
9.6.3 Digital input
9.6.3.1
Overview
HB300 | CPU | 013-CCF0R00 | en | 16-40
Unter Einsatz der SFCs 55, 56 und 57 können Sie zur Laufzeit Parameter ändern und an
die entsprechenden Module übertragen. Hierbei sind die modulspezifischen Parameter in
sogenannten "Datensätzen" abzulegen. Näheres zum Aufbau der Datensätze finden Sie
in der Beschreibung zu den Modulen.
On this CPU the connectors for digital respectively analog signal and Technological
n
functions are combined in a one casing.
n
Die Project engineering happens in the VIPA SPEED7 Studio as CPU 013-CCF0R00.
n
For parametrization of the digital I/O periphery and the technological functions the
corresponding sub modules of the CPU013-CCF0R00 are to be used.
n
The controlling of the operating modes of the technological functions happens by
means of handling blocks of the user program.
n
2xUx12Bit (0 ... 10V)
n
Sub module 'AI2'
Ä Chapter 5.3 'Analog input' on page 91
n
Access
WORD
WORD
The analog input part has a filter integrated. The parametrization of the filter happens via
the parameter 'Filter channel 0/1' . The default value of the filter is 1000ms. The following
values can be entered:
n
2ms: no filter
n
100ms: small filter
n
1000ms: medium filter
10000ms: maximum filter
n
n
16xDC 24V
n
Sub module 'DI16/DO12'
Ä Chapter 5.4 'Digital input' on page 95
n
Configuration with VIPA SPEED7 Studio
Deployment I/O periphery > Digital input
Assignment
Analog input channel 0 (X4)
Analog input channel 1 (X4)
205