YASKAWA CPU 013C Manual page 106

Deployment I/O periphery
Counting > SFB 47 - COUNT - Counter controlling
Parameters
Name Data type
LADDR WORD
CHANNEL INT
SW_GATE BOOL
CTRL_DO BOOL
SET_DO BOOL
JOB_REQ BOOL
JOB_ID WORD
JOB_VAL DINT
STS_GATE BOOL
STS_STRT BOOL
STS_LTCH BOOL
STS_DO BOOL
STS_C_DN BOOL
STS_C_UP BOOL
COUNTVAL DINT
LATCHVAL DINT
JOB_DONE BOOL
JOB_ERR BOOL
JOB_STAT WORD
106
Address Default value
(Instance
DB)
0.0 300h
2.0 0
4.0 FALSE
4.1 FALSE
4.2 FALSE
4.3 FALSE
6.0 0
8.0 0
12.0 FALSE
12.1 FALSE
12.2 FALSE
12.3 FALSE
12.4 FALSE
12.5 FALSE
14.0 0
18.0 0
22.0 TRUE
22.1 FALSE
24.0 0
Comment
This parameter is not evaluated. Always the internal
I/O periphery is addressed.
Channel number
Enables the Software gate
Enables the output
False: Standard Digital Output
Parameter is not evaluated
Initiates the job (edge 0-1)
Job ID
Value for write jobs
Status of the internal gate
Status of the hardware gate
Status of the latch input
Status of the output
Status of the down-count
Always indicates the last direction of count. After
the first SFB call STS_C_DN is set FALSE.
Status of the up-count
Always indicates the last direction of count. After
the first SFB call STS_C_UP is set TRUE.
Actual count value
Actual latch value
New job can be started
Job error
Job error ID
HB300 | CPU | 013-CCF0R00 | en | 16-40
VIPA System SLIO