YASKAWA CPU 013C Manual page 241

VIPA System SLIO
Event ID
0xEA65
0xEA66
0xEA67
0xEA68
HB300 | CPU | 013-CCF0R00 | en | 16-40
Description
ZInfo1 : Too many input bytes per ms
ZInfo1 : Too many output bytes per device
ZInfo1 : Too many productive connections
ZInfo1 : Too many input bytes in the process image
ZInfo1 : Too many output bytes in the process image
ZInfo1 : Configuration not available
ZInfo1 : Configuration not valid
ZInfo1 : Refresh time too short
ZInfo1 : Cycle time too big
ZInfo1 : Not valid device number
ZInfo1 : CPU is configured as I device
ZInfo1 : Use different method to obtain IP address Is not supported for the IP address of the controller
ZInfo2 : Incompatible configuration (SDB version not supported)
ZInfo2 : EtherCAT: EoE configured but not supported
ZInfo2 : DC parameter not valid
Internal error - Please contact the hotline!
PROFINET error in communication stack
PK : Rack/slot
OB : StackError.Service
DatID : StackError.DeviceRef
ZInfo1 : StackError.Error.Code
ZInfo2 : StackError.Error.Detail
ZInfo3 : StackError.Error.AdditionalDetail
ZInfo3 : StackError.Error.AreaCode
PROFINET IO controller: Error reading record set
PK : Error type
0: Record set error local
1: Record set error stack
2: Record set error station
OB : Rack/slot of the controller
DatID : Device
ZInfo1 : Record set number
ZInfo2 : Record set handle (caller)
ZInfo3 : Internal error code from PN stack
PROFINET IO controller: Error at writing record set
PK : Error type
0: Record set error local
1: Record set error stack
2: Record set error station
OB : Rack/slot of the controller
DatID : Device
System specific event IDs
241