YASKAWA CPU 013C Manual page 84

Deployment CPU 013-CCF0R00
Deployment storage media - VSD, VSC
VSD
VSC
84
VSDs are external storage media based on SD memory cards. VSDs are pre-formatted
with the PC format FAT 16 (max. 2GB) and can be accessed via a card reader. After
PowerON respectively an overall reset the CPU checks, if there is a VSD with data valid
for the CPU.
Push the VSD into the slot until it snaps in leaded by a spring mechanism. This ensures
contacting. By sliding down the sliding mechanism, a just installed VSD card can be pro-
tected against drop out.
To remove, slide the sliding mechanism up again and push the storage media against the
spring pressure until it is unlocked with a click.
CAUTION!
If the media was already unlocked by the spring mechanism, with shifting
the sliding mechanism, a just installed memory card can jump out of the
slot!
The VSC is a VSD with the possibility to enable optional functions. Here you have the
opportunity to accordingly expand your work memory respectively enable field bus func-
tions. Information about the enabled functions can be shown via the web page.
Ä Chapter 4.10 'Accessing the web server' on page 74
CAUTION!
Please regard that the VSC must remain plugged when you've enabled
optional functions at your CPU. Otherwise the SF LED is on and the CPU
switches to STOP after 72 hours. As soon as an activated VSC is not
plugged, the SF LED is on and the "TrialTime" counts downwards from 72
hours to 0. After 72 hours the CPU switches to STOP state. By plugging
the VSC, the SF LED expires and the CPU is running again without any
restrictions.
The VSC cannot be replaced by a VSC of the same optional functions.
The activation code is fixed to the VSD by means of an unique serial
number. Here the function as an external memory card is not affected.
VIPA System SLIO
HB300 | CPU | 013-CCF0R00 | en | 16-40