Table of Contents
Advertisement
VIPA System SLIO
Standard wiring
HB300 | CPU | 013-CCF0R00 | en | 16-40
1.
Insert a suited screwdriver at an angel into the square opening as shown. Press
and hold the screwdriver in the opposite direction to open the contact spring.
2.
Insert the stripped end of wire into the round opening. You can use wires with a
cross section of 0.08mm
3.
By removing the screwdriver, the wire is securely fixed via the spring contact to the
terminal.
(1) DC 24V for power section supply I/O area (max. 10A)
(2) DC 24V for electronic power supply bus coupler and I/O area
2
2
up to 1.5mm
Basics and mounting
Wiring > Wiring power modules
25
Advertisement
Table of Contents
