Transfer Via Memory Card - YASKAWA CPU 013C Manual

VIPA System SLIO

9.7.3 Transfer via memory card

Proceeding transfer via
memory card
HB300 | CPU | 013-CCF0R00 | en | 16-40
The memory card serves as external storage medium. There may be stored several proj-
ects and sub-directories on a memory card. Please regard that your current project is
stored in the root directory and has one of the following file names:
n S7PROG.WLD
n AUTOLOAD.WLD
1. Start the SPEED7 Studio with your project.
2. Click in the 'Project tree' at the CPU.
3. Create in the SPEED7 Studio with 'Context menu
è Export device configuration (WLD)' a wld file.
ð The wld file is created. This contains the user program and the hardware config-
uration
4. Copy the wld file at a suited memory card. Plug this into your CPU and start it
again.
ð The transfer of the application program from the memory card into the CPU
takes place depending on the file name after an overall reset or PowerON.
S7PROG.WLD is read from the memory card after overall reset.
AUTOLOAD.WLD is read from the memory card after PowerON.
The blinking of the SD LED of the CPU marks the active transfer. Please regard
that your user memory serves for enough space for your user program, other-
wise your user program is not completely loaded and the SF LED gets on.
Configuration with VIPA SPEED7 Studio
SPEED7 Studio - Project transfer > Transfer via memory card
217