Parametrization - YASKAWA CPU 013C Manual

VIPA System SLIO

5.4.3 Parametrization

5.4.3.1 Adress assignment
Sub module Input address
DI24/DO16 136
137
5.4.3.2 Hardware interrupt
Parameter hardware con-
figuration
5.4.3.3 Input delay
Parameter hardware con-
figuration
HB300 | CPU | 013-CCF0R00 | en | 16-40
Access
BYTE
BYTE
With the parameter 'Hardware interrupt at ...' you can specify a hardware interrupt for
each input for the corresponding edge. The hardware interrupt is disabled, if nothing is
selected (default setting). A diagnostics interrupt is only supported with Hardware inter-
rupt lost. Select with the arrow keys the input and enable the according hardware inter-
rupts.
Here is valid:
n Rising edge: Edge 0-1
n Falling edge: Edge 1-0
n The input delay can be configured per channel in groups of 4.
n An input delay of 0.1ms is only possible with "fast" inputs, which have a max. input
frequency of 100kHz
for slow inputs is limited to 0.5ms.
n Range of values: 0.1ms / 0.5ms / 3ms / 15ms
Assignment
Digital input I+0.0 ... I+0.7 (X4)
Digital input I+1.0 ... I+1.7 (X4)
Ä 'X4: Connector' on page 93. Within a group, the input delay
Deployment I/O periphery
Digital input > Parametrization
97