Table of Contents
Advertisement
VIPA System SLIO
4.15
Deployment storage media - VSD, VSC
Overview
HB300 | CPU | 013-CCF0R00 | en | 16-40
After a firmware update of the CPU you always should execute a Factory
reset.
At the front of the CPU there is a slot for storage media. Here the following storage media
can be plugged:
n
VSD - VIPA SD-Card
–
External memory card for programs and firmware.
n
VSC - VIPASetCard
–
External memory card (VSD) for programs and firmware with the possibility to
unlock optional functions like work memory and field bus interfaces.
–
These functions can be purchased separately.
–
To activate the corresponding card is to be installed and a Overall reset is to be
Ä Chapter 4.12 'Overall reset' on page 79
established.
A list of the currently available VSD respectively VSC can be found at
www.vipa.com
You can cause the CPU to load a project automatically respectively to execute a com-
mand file by means of pre-defined file names.
Deployment CPU 013-CCF0R00
Deployment storage media - VSD, VSC
83
Advertisement
Table of Contents
