YASKAWA CPU 013C Manual page 208

Configuration with VIPA SPEED7 Studio
Deployment I/O periphery > Counter
Parameter overview
Operating parameters
Main count direction
Gate function
Start value
End value
Comparison value
Hysteresis
208
Description
n None No restriction of the counting range
n Up: Restricts the up-counting range. The counter starts
from 0 or load value, counts in positive direction up to
the declaration end value -1 and then jumps back to
load value at the next positive transducer pulse.
n Down: Restricts the down-counting range. The counter
starts from the declared start value or load value in
negative direction, counts to 1 and then jumps to start
value at the next negative encoder pulse. Function is
disable with count continuously.
Cancel count: The count starts when the gate opens
n
and resumes at the load value when the gate opens
again.
n Stop count: The count is interrupted when the gate
closes and resumed at the last actual counter value
when the gate opens again.
Ä Chapter 5.6.7.2 'Gate function' on page 122
Start value with counting direction backward.
End value with main counting direction forward.
Range of values: 2...2147483647 (2
The count value is compared with the comparison value.
See also the parameter "Characteristics of the output":
n No main counting direction
– Range of values: -2)
Main counting direction forward
n
– Range of values: -2
n Main counting direction backward
– Range of values: 1 to +2
The hysteresis serves the avoidance of many toggle pro-
cesses of the output, if the counter value is in the range of
the comparison value.
0, 1: Hysteresis disabled
Range of values: 0 to 255
31
-1)
31 to +2) 31 -1
31
to end value-1
31 -1
HB300 | CPU | 013-CCF0R00 | en | 16-40
VIPA System SLIO
Assignment
n None
Abort count process
31
2147483647 (2 -1)
0
0